1975 Fiat 130 vs. 2006 Mercedes-Benz C

To start off, 2006 Mercedes-Benz C is newer by 31 year(s). Which means there will be less support and parts availability for 1975 Fiat 130. In addition, the cost of maintenance, including insurance, on 1975 Fiat 130 would be higher. At 3,498 cc (6 cylinders), 2006 Mercedes-Benz C is equipped with a bigger engine. In terms of performance, 2006 Mercedes-Benz C (268 HP @ 6000 RPM) has 103 more horse power than 1975 Fiat 130. (165 HP @ 5600 RPM) In normal driving conditions, 2006 Mercedes-Benz C should accelerate faster than 1975 Fiat 130. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mercedes-Benz C weights approximately 695 kg more than 1975 Fiat 130. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mercedes-Benz C (350 Nm @ 2400 RPM) has 101 more torque (in Nm) than 1975 Fiat 130. (249 Nm @ 3400 RPM). This means 2006 Mercedes-Benz C will have an easier job in driving up hills or pulling heavy equipment than 1975 Fiat 130. 2006 Mercedes-Benz C has automatic transmission and 1975 Fiat 130 has manual transmission. 1975 Fiat 130 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mercedes-Benz C will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 Fiat 130 2006 Mercedes-Benz C
Make Fiat Mercedes-Benz
Model 130 C
Year Released 1975 2006
Engine Position Front Front
Engine Size 3235 cc 3498 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type V V
Valves per Cylinder 2 valves 4 valves
Horse Power 165 HP 268 HP
Engine RPM 5600 RPM 6000 RPM
Torque 249 Nm 350 Nm
Torque RPM 3400 RPM 2400 RPM
Engine Bore Size 102 mm 92.9 mm
Engine Stroke Size 66 mm 86 mm
Engine Compression Ratio 9.0:1 10.7:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 995 kg 1690 kg
Vehicle Length 4760 mm 4860 mm
Vehicle Width 1760 mm 1730 mm
Vehicle Height 1380 mm 1500 mm
Wheelbase Size 2730 mm 2720 mm
Fuel Tank Capacity 38 L 65 L