1975 Fiat 133 vs. 1996 GAZ 3110
To start off, 1996 GAZ 3110 is newer by 21 year(s). Which means there will be less support and parts availability for 1975 Fiat 133. In addition, the cost of maintenance, including insurance, on 1975 Fiat 133 would be higher. At 2,446 cc (4 cylinders), 1996 GAZ 3110 is equipped with a bigger engine. In terms of performance, 1996 GAZ 3110 (90 HP @ 4200 RPM) has 56 more horse power than 1975 Fiat 133. (34 HP @ 4800 RPM) In normal driving conditions, 1996 GAZ 3110 should accelerate faster than 1975 Fiat 133. With that said, vehicle weight also plays an important factor in acceleration. 1996 GAZ 3110 weights approximately 760 kg more than 1975 Fiat 133. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 GAZ 3110 (230 Nm @ 2500 RPM) has 175 more torque (in Nm) than 1975 Fiat 133. (55 Nm @ 3200 RPM). This means 1996 GAZ 3110 will have an easier job in driving up hills or pulling heavy equipment than 1975 Fiat 133.
Compare all specifications:
1975 Fiat 133 | 1996 GAZ 3110 | |
Make | Fiat | GAZ |
Model | 133 | 3110 |
Year Released | 1975 | 1996 |
Engine Position | Rear | Front |
Engine Size | 843 cc | 2446 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 34 HP | 90 HP |
Engine RPM | 4800 RPM | 4200 RPM |
Torque | 55 Nm | 230 Nm |
Torque RPM | 3200 RPM | 2500 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Rear | Rear |
Vehicle Weight | 690 kg | 1450 kg |
Vehicle Length | 3460 mm | 4880 mm |
Vehicle Width | 1430 mm | 1810 mm |
Vehicle Height | 1330 mm | 1490 mm |
Wheelbase Size | 2030 mm | 2810 mm |