1975 Fiat 500 vs. 2000 Honda Step Wagon

To start off, 2000 Honda Step Wagon is newer by 25 year(s). Which means there will be less support and parts availability for 1975 Fiat 500. In addition, the cost of maintenance, including insurance, on 1975 Fiat 500 would be higher. At 1,973 cc (4 cylinders), 2000 Honda Step Wagon is equipped with a bigger engine. In terms of performance, 2000 Honda Step Wagon (123 HP @ 5500 RPM) has 105 more horse power than 1975 Fiat 500. (18 HP @ 4600 RPM) In normal driving conditions, 2000 Honda Step Wagon should accelerate faster than 1975 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2000 Honda Step Wagon weights approximately 942 kg more than 1975 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2000 Honda Step Wagon is four wheel drive (4WD), it will have significant more traction and grip than 1975 Fiat 500. In wet, icy, snow, or gravel driving conditions, 2000 Honda Step Wagon will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Honda Step Wagon (185 Nm @ 4200 RPM) has 158 more torque (in Nm) than 1975 Fiat 500. (27 Nm @ 3200 RPM). This means 2000 Honda Step Wagon will have an easier job in driving up hills or pulling heavy equipment than 1975 Fiat 500. 2000 Honda Step Wagon has automatic transmission and 1975 Fiat 500 has manual transmission. 1975 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Honda Step Wagon will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 Fiat 500 2000 Honda Step Wagon
Make Fiat Honda
Model 500 Step Wagon
Year Released 1975 2000
Body Type Coupe Minivan
Engine Position Rear Front
Engine Size 498 cc 1973 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 18 HP 123 HP
Engine RPM 4600 RPM 5500 RPM
Torque 27 Nm 185 Nm
Torque RPM 3200 RPM 4200 RPM
Engine Bore Size 67.4 mm 85 mm
Engine Stroke Size 70 mm 88 mm
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 6 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 510 kg 1452 kg
Vehicle Length 2980 mm 4610 mm
Vehicle Width 1330 mm 1700 mm
Vehicle Height 1330 mm 1840 mm
Wheelbase Size 1850 mm 2810 mm