1975 Lancia Beta vs. 1974 Holden Statesman
To start off, 1975 Lancia Beta is newer by 1 year(s). Which means there will be less support and parts availability for 1974 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1974 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1974 Holden Statesman is equipped with a bigger engine. In terms of performance, 1974 Holden Statesman (238 HP @ 4600 RPM) has 138 more horse power than 1975 Lancia Beta. (100 HP @ 5800 RPM) In normal driving conditions, 1974 Holden Statesman should accelerate faster than 1975 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 1974 Holden Statesman weights approximately 499 kg more than 1975 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1974 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1974 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1975 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1974 Holden Statesman (427 Nm @ 3000 RPM) has 293 more torque (in Nm) than 1975 Lancia Beta. (134 Nm @ 3000 RPM). This means 1974 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Beta. 1974 Holden Statesman has automatic transmission and 1975 Lancia Beta has manual transmission. 1975 Lancia Beta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1974 Holden Statesman will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Lancia Beta | 1974 Holden Statesman | |
Make | Lancia | Holden |
Model | Beta | Statesman |
Year Released | 1975 | 1974 |
Engine Position | Front | Front |
Engine Size | 1584 cc | 5042 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 100 HP | 238 HP |
Engine RPM | 5800 RPM | 4600 RPM |
Torque | 134 Nm | 427 Nm |
Torque RPM | 3000 RPM | 3000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1036 kg | 1535 kg |
Vehicle Length | 4290 mm | 5190 mm |
Vehicle Width | 1660 mm | 1890 mm |
Vehicle Height | 1330 mm | 1380 mm |
Wheelbase Size | 2480 mm | 2900 mm |