1975 Lancia Beta vs. 1998 Mercedes-Benz CLK

To start off, 1998 Mercedes-Benz CLK is newer by 23 year(s). Which means there will be less support and parts availability for 1975 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1975 Lancia Beta would be higher. At 1,996 cc (4 cylinders), 1998 Mercedes-Benz CLK is equipped with a bigger engine. In terms of performance, 1998 Mercedes-Benz CLK (134 HP @ 5500 RPM) has 19 more horse power than 1975 Lancia Beta. (115 HP @ 5500 RPM) In normal driving conditions, 1998 Mercedes-Benz CLK should accelerate faster than 1975 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 1998 Mercedes-Benz CLK weights approximately 440 kg more than 1975 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1998 Mercedes-Benz CLK is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1998 Mercedes-Benz CLK. However, in wet, icy, snow, or gravel driving conditions, 1975 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Mercedes-Benz CLK (185 Nm @ 3700 RPM) has 9 more torque (in Nm) than 1975 Lancia Beta. (176 Nm @ 2800 RPM). This means 1998 Mercedes-Benz CLK will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Beta.

Compare all specifications:

1975 Lancia Beta 1998 Mercedes-Benz CLK
Make Lancia Mercedes-Benz
Model Beta CLK
Year Released 1975 1998
Body Type Hatchback Coupe
Engine Position Front Front
Engine Size 1995 cc 1996 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 115 HP 134 HP
Engine RPM 5500 RPM 5500 RPM
Torque 176 Nm 185 Nm
Torque RPM 2800 RPM 3700 RPM
Engine Bore Size 84 mm 89.9 mm
Engine Stroke Size 90 mm 78.7 mm
Engine Compression Ratio 8.9:1 10.6:1
Top Speed 180 km/hour 209 km/hour
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 2 doors
Vehicle Weight 1060 kg 1500 kg
Vehicle Length 4290 mm 4580 mm
Vehicle Width 1660 mm 1730 mm
Vehicle Height 1330 mm 1350 mm
Wheelbase Size 2550 mm 2720 mm
Fuel Tank Capacity 51 L 69 L