1975 Lancia Beta vs. 2010 Chrysler Sebring

To start off, 2010 Chrysler Sebring is newer by 35 year(s). Which means there will be less support and parts availability for 1975 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1975 Lancia Beta would be higher. At 2,360 cc (4 cylinders), 2010 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 73 more horse power than 1975 Lancia Beta. (100 HP @ 5800 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1975 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 874 kg more than 1975 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (225 Nm @ 4400 RPM) has 91 more torque (in Nm) than 1975 Lancia Beta. (134 Nm @ 3000 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Beta. 2010 Chrysler Sebring has automatic transmission and 1975 Lancia Beta has manual transmission. 1975 Lancia Beta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 Lancia Beta 2010 Chrysler Sebring
Make Lancia Chrysler
Model Beta Sebring
Year Released 1975 2010
Body Type Hatchback Sedan
Engine Position Front Front
Engine Size 1584 cc 2360 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 100 HP 173 HP
Engine RPM 5800 RPM 6000 RPM
Torque 134 Nm 225 Nm
Torque RPM 3000 RPM 4400 RPM
Engine Bore Size 84 mm 86 mm
Engine Stroke Size 71.5 mm 101 mm
Engine Compression Ratio 9.4:1 9.0:1
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1036 kg 1910 kg
Vehicle Length 4290 mm 4850 mm
Vehicle Width 1660 mm 1810 mm
Vehicle Height 1330 mm 1510 mm
Wheelbase Size 2480 mm 2770 mm
Fuel Consumption Overall 6.7 L/100km 9.8 L/100km
Fuel Tank Capacity 59 L 64 L