1975 Lancia Fulvia vs. 2005 Porsche Boxster

To start off, 2005 Porsche Boxster is newer by 30 year(s). Which means there will be less support and parts availability for 1975 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1975 Lancia Fulvia would be higher. At 3,164 cc (6 cylinders), 2005 Porsche Boxster is equipped with a bigger engine. In terms of performance, 2005 Porsche Boxster (280 HP @ 6200 RPM) has 166 more horse power than 1975 Lancia Fulvia. (114 HP @ 6000 RPM) In normal driving conditions, 2005 Porsche Boxster should accelerate faster than 1975 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 2005 Porsche Boxster weights approximately 345 kg more than 1975 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Porsche Boxster is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Porsche Boxster. However, in wet, icy, snow, or gravel driving conditions, 1975 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Porsche Boxster (320 Nm @ 4700 RPM) has 167 more torque (in Nm) than 1975 Lancia Fulvia. (153 Nm @ 4500 RPM). This means 2005 Porsche Boxster will have an easier job in driving up hills or pulling heavy equipment than 1975 Lancia Fulvia. 2005 Porsche Boxster has automatic transmission and 1975 Lancia Fulvia has manual transmission. 1975 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Porsche Boxster will be easier to drive especially in heavy traffic.

Compare all specifications:

1975 Lancia Fulvia 2005 Porsche Boxster
Make Lancia Porsche
Model Fulvia Boxster
Year Released 1975 2005
Body Type Coupe Convertible
Engine Position Front Middle
Engine Size 1584 cc 3164 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line boxer
Horse Power 114 HP 280 HP
Engine RPM 6000 RPM 6200 RPM
Torque 153 Nm 320 Nm
Torque RPM 4500 RPM 4700 RPM
Engine Bore Size 82 mm 93 mm
Engine Stroke Size 75 mm 78 mm
Engine Compression Ratio 10.5:1 11.0:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1000 kg 1345 kg
Vehicle Length 3990 mm 4340 mm
Vehicle Width 1570 mm 1810 mm
Vehicle Height 1330 mm 1300 mm
Wheelbase Size 2340 mm 2420 mm
Fuel Tank Capacity 38 L 53 L