1975 Mazda RX-2 vs. 1962 Mercedes-Benz SE
To start off, 1975 Mazda RX-2 is newer by 13 year(s). Which means there will be less support and parts availability for 1962 Mercedes-Benz SE. In addition, the cost of maintenance, including insurance, on 1962 Mercedes-Benz SE would be higher. At 2,292 cc, 1975 Mazda RX-2 is equipped with a bigger engine. In terms of performance, both vehicles can yield 118 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1962 Mercedes-Benz SE weights approximately 560 kg more than 1975 Mazda RX-2.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 Mercedes-Benz SE (190 Nm @ 3900 RPM) has 33 more torque (in Nm) than 1975 Mazda RX-2. (157 Nm @ 3500 RPM). This means 1962 Mercedes-Benz SE will have an easier job in driving up hills or pulling heavy equipment than 1975 Mazda RX-2.
Compare all specifications:
1975 Mazda RX-2 | 1962 Mercedes-Benz SE | |
Make | Mazda | Mercedes-Benz |
Model | RX-2 | SE |
Year Released | 1975 | 1962 |
Engine Position | Front | Front |
Engine Size | 2292 cc | 2195 cc |
Engine Type | dual-disk rotary | in-line |
Horse Power | 118 HP | 118 HP |
Engine RPM | 6500 RPM | 4800 RPM |
Torque | 157 Nm | 190 Nm |
Torque RPM | 3500 RPM | 3900 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 960 kg | 1520 kg |
Vehicle Length | 4160 mm | 4880 mm |
Vehicle Width | 1590 mm | 1800 mm |
Vehicle Height | 1400 mm | 1450 mm |
Wheelbase Size | 2480 mm | 2760 mm |