1975 Reliant Kitten vs. 2010 Chrysler Town & Country
To start off, 2010 Chrysler Town & Country is newer by 35 year(s). Which means there will be less support and parts availability for 1975 Reliant Kitten. In addition, the cost of maintenance, including insurance, on 1975 Reliant Kitten would be higher. At 4,000 cc (6 cylinders), 2010 Chrysler Town & Country is equipped with a bigger engine. In terms of performance, 2010 Chrysler Town & Country (251 HP @ 6000 RPM) has 212 more horse power than 1975 Reliant Kitten. (39 HP @ 5500 RPM) In normal driving conditions, 2010 Chrysler Town & Country should accelerate faster than 1975 Reliant Kitten. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Town & Country weights approximately 1558 kg more than 1975 Reliant Kitten. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Reliant Kitten is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Reliant Kitten. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Town & Country, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Town & Country (351 Nm @ 4100 RPM) has 288 more torque (in Nm) than 1975 Reliant Kitten. (63 Nm @ 3500 RPM). This means 2010 Chrysler Town & Country will have an easier job in driving up hills or pulling heavy equipment than 1975 Reliant Kitten. 2010 Chrysler Town & Country has automatic transmission and 1975 Reliant Kitten has manual transmission. 1975 Reliant Kitten will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Town & Country will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Reliant Kitten | 2010 Chrysler Town & Country | |
Make | Reliant | Chrysler |
Model | Kitten | Town & Country |
Year Released | 1975 | 2010 |
Engine Position | Front | Front |
Engine Size | 848 cc | 4000 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 39 HP | 251 HP |
Engine RPM | 5500 RPM | 6000 RPM |
Torque | 63 Nm | 351 Nm |
Torque RPM | 3500 RPM | 4100 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Vehicle Weight | 538 kg | 2096 kg |
Vehicle Length | 3350 mm | 5144 mm |
Vehicle Width | 1430 mm | 1953 mm |
Vehicle Height | 1400 mm | 1814 mm |
Wheelbase Size | 2150 mm | 3078 mm |
Fuel Tank Capacity | 27 L | 76 L |