1976 Alpine A 110 vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Alpine A 110. In addition, the cost of maintenance, including insurance, on 1976 Alpine A 110 would be higher. At 2,260 cc (4 cylinders), 2008 Mazda 6 is equipped with a bigger engine. In terms of performance, 2008 Mazda 6 (156 HP @ 6500 RPM) has 63 more horse power than 1976 Alpine A 110. (93 HP @ 6000 RPM) In normal driving conditions, 2008 Mazda 6 should accelerate faster than 1976 Alpine A 110. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 6 weights approximately 537 kg more than 1976 Alpine A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1976 Alpine A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Alpine A 110. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 6 (209 Nm @ 4000 RPM) has 81 more torque (in Nm) than 1976 Alpine A 110. (128 Nm @ 3000 RPM). This means 2008 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1976 Alpine A 110. 2008 Mazda 6 has automatic transmission and 1976 Alpine A 110 has manual transmission. 1976 Alpine A 110 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Alpine A 110 2008 Mazda 6
Make Alpine Mazda
Model A 110 6
Year Released 1976 2008
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 1647 cc 2260 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 93 HP 156 HP
Engine RPM 6000 RPM 6500 RPM
Torque 128 Nm 209 Nm
Torque RPM 3000 RPM 4000 RPM
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 792 kg 1329 kg
Vehicle Length 3860 mm 4750 mm
Vehicle Width 1530 mm 1790 mm
Vehicle Height 1140 mm 1450 mm
Wheelbase Size 2110 mm 2680 mm
Fuel Tank Capacity 50 L 68 L