1976 Alpine A 310 vs. 2003 Toyota Mark II

To start off, 2003 Toyota Mark II is newer by 27 year(s). Which means there will be less support and parts availability for 1976 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1976 Alpine A 310 would be higher. At 2,662 cc (6 cylinders), 1976 Alpine A 310 is equipped with a bigger engine. In terms of performance, 2003 Toyota Mark II (156 HP @ 6200 RPM) has 8 more horse power than 1976 Alpine A 310. (148 HP @ 6000 RPM) In normal driving conditions, 2003 Toyota Mark II should accelerate faster than 1976 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 2003 Toyota Mark II weights approximately 554 kg more than 1976 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2003 Toyota Mark II is four wheel drive (4WD), it will have significant more traction and grip than 1976 Alpine A 310. In wet, icy, snow, or gravel driving conditions, 2003 Toyota Mark II will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Alpine A 310 (208 Nm @ 3500 RPM) has 8 more torque (in Nm) than 2003 Toyota Mark II. (200 Nm @ 4400 RPM). This means 1976 Alpine A 310 will have an easier job in driving up hills or pulling heavy equipment than 2003 Toyota Mark II. 2003 Toyota Mark II has automatic transmission and 1976 Alpine A 310 has manual transmission. 1976 Alpine A 310 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Toyota Mark II will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Alpine A 310 2003 Toyota Mark II
Make Alpine Toyota
Model A 310 Mark II
Year Released 1976 2003
Engine Position Rear Front
Engine Size 2662 cc 1988 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 156 HP
Engine RPM 6000 RPM 6200 RPM
Torque 208 Nm 200 Nm
Torque RPM 3500 RPM 4400 RPM
Engine Bore Size 88 mm 75.1 mm
Engine Stroke Size 73 mm 75 mm
Engine Compression Ratio 10.1:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1016 kg 1570 kg
Vehicle Length 4190 mm 4740 mm
Vehicle Width 1650 mm 1770 mm
Vehicle Height 1160 mm 1490 mm
Wheelbase Size 2280 mm 2800 mm
Fuel Tank Capacity 62 L 70 L