1976 Alpine A 310 vs. 2007 BMW 320
To start off, 2007 BMW 320 is newer by 31 year(s). Which means there will be less support and parts availability for 1976 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1976 Alpine A 310 would be higher. At 2,662 cc (6 cylinders), 1976 Alpine A 310 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2007 BMW 320 weights approximately 379 kg more than 1976 Alpine A 310.
Let's talk about torque, 1976 Alpine A 310 (208 Nm @ 3500 RPM) has 8 more torque (in Nm) than 2007 BMW 320. (200 Nm @ 3600 RPM). This means 1976 Alpine A 310 will have an easier job in driving up hills or pulling heavy equipment than 2007 BMW 320.
Compare all specifications:
1976 Alpine A 310 | 2007 BMW 320 | |
Make | Alpine | BMW |
Model | A 310 | 320 |
Year Released | 1976 | 2007 |
Body Type | Coupe | Sedan |
Engine Position | Rear | Front |
Engine Size | 2662 cc | 1994 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 148 HP | 148 HP |
Engine RPM | 6000 RPM | 6200 RPM |
Torque | 208 Nm | 200 Nm |
Torque RPM | 3500 RPM | 3600 RPM |
Engine Bore Size | 88 mm | 84 mm |
Engine Stroke Size | 73 mm | 90 mm |
Engine Compression Ratio | 10.1:1 | 10.5:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Top Speed | 220 km/hour | 220 km/hour |
Acceleration 0-100mph | 7.6 seconds | 9 seconds |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1016 kg | 1395 kg |
Vehicle Length | 4190 mm | 4530 mm |
Vehicle Width | 1650 mm | 1430 mm |
Vehicle Height | 1160 mm | 1880 mm |
Wheelbase Size | 2280 mm | 2770 mm |
Fuel Tank Capacity | 62 L | 60 L |