1976 Alpine A 310 vs. 2008 GMC Acadia

To start off, 2008 GMC Acadia is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1976 Alpine A 310 would be higher. At 3,600 cc (6 cylinders), 2008 GMC Acadia is equipped with a bigger engine. In terms of performance, 2008 GMC Acadia (275 HP @ 6600 RPM) has 127 more horse power than 1976 Alpine A 310. (148 HP @ 6000 RPM) In normal driving conditions, 2008 GMC Acadia should accelerate faster than 1976 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Acadia weights approximately 1633 kg more than 1976 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 GMC Acadia is four wheel drive (4WD), it will have significant more traction and grip than 1976 Alpine A 310. In wet, icy, snow, or gravel driving conditions, 2008 GMC Acadia will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Acadia (340 Nm @ 3200 RPM) has 131 more torque (in Nm) than 1976 Alpine A 310. (209 Nm @ 3500 RPM). This means 2008 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1976 Alpine A 310. 2008 GMC Acadia has automatic transmission and 1976 Alpine A 310 has manual transmission. 1976 Alpine A 310 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Alpine A 310 2008 GMC Acadia
Make Alpine GMC
Model A 310 Acadia
Year Released 1976 2008
Body Type Coupe SUV
Engine Position Rear Front
Engine Size 2664 cc 3600 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type V V
Valves per Cylinder 2 valves 4 valves
Horse Power 148 HP 275 HP
Engine RPM 6000 RPM 6600 RPM
Torque 209 Nm 340 Nm
Torque RPM 3500 RPM 3200 RPM
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 8 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 980 kg 2613 kg
Vehicle Length 4190 mm 5100 mm
Vehicle Width 1650 mm 1990 mm
Vehicle Height 1160 mm 1780 mm
Wheelbase Size 2280 mm 3030 mm
Fuel Tank Capacity 38 L 83 L