1976 Austin Allegro vs. 2010 Buick Park Avenue
To start off, 2010 Buick Park Avenue is newer by 34 year(s). Which means there will be less support and parts availability for 1976 Austin Allegro. In addition, the cost of maintenance, including insurance, on 1976 Austin Allegro would be higher. At 3,564 cc (6 cylinders), 2010 Buick Park Avenue is equipped with a bigger engine. In terms of performance, 2010 Buick Park Avenue (251 HP @ 6500 RPM) has 207 more horse power than 1976 Austin Allegro. (44 HP @ 5250 RPM) In normal driving conditions, 2010 Buick Park Avenue should accelerate faster than 1976 Austin Allegro. With that said, vehicle weight also plays an important factor in acceleration. 2010 Buick Park Avenue weights approximately 1076 kg more than 1976 Austin Allegro. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Buick Park Avenue is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Buick Park Avenue. However, in wet, icy, snow, or gravel driving conditions, 1976 Austin Allegro, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Buick Park Avenue (340 Nm @ 3200 RPM) has 266 more torque (in Nm) than 1976 Austin Allegro. (74 Nm @ 2900 RPM). This means 2010 Buick Park Avenue will have an easier job in driving up hills or pulling heavy equipment than 1976 Austin Allegro. 2010 Buick Park Avenue has automatic transmission and 1976 Austin Allegro has manual transmission. 1976 Austin Allegro will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Buick Park Avenue will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Austin Allegro | 2010 Buick Park Avenue | |
Make | Austin | Buick |
Model | Allegro | Park Avenue |
Year Released | 1976 | 2010 |
Engine Position | Front | Front |
Engine Size | 1098 cc | 3564 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 44 HP | 251 HP |
Engine RPM | 5250 RPM | 6500 RPM |
Torque | 74 Nm | 340 Nm |
Torque RPM | 2900 RPM | 3200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 815 kg | 1891 kg |
Vehicle Length | 3200 mm | 5175 mm |
Vehicle Width | 1620 mm | 1899 mm |
Vehicle Height | 1400 mm | 1480 mm |
Wheelbase Size | 2450 mm | 3009 mm |