1976 BMW 3.3 vs. 2008 Chevrolet Matiz

To start off, 2008 Chevrolet Matiz is newer by 32 year(s). Which means there will be less support and parts availability for 1976 BMW 3.3. In addition, the cost of maintenance, including insurance, on 1976 BMW 3.3 would be higher. At 3,295 cc (6 cylinders), 1976 BMW 3.3 is equipped with a bigger engine. In terms of performance, 1976 BMW 3.3 (194 HP @ 5500 RPM) has 143 more horse power than 2008 Chevrolet Matiz. (51 HP @ 6000 RPM). In normal driving conditions, 1976 BMW 3.3 should accelerate faster than 2008 Chevrolet Matiz. With that said, vehicle weight also plays an important factor in acceleration. 1976 BMW 3.3 weights approximately 719 kg more than 2008 Chevrolet Matiz. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1976 BMW 3.3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 BMW 3.3. However, in wet, icy, snow, or gravel driving conditions, 2008 Chevrolet Matiz, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 BMW 3.3 (285 Nm @ 4300 RPM) has 214 more torque (in Nm) than 2008 Chevrolet Matiz. (71 Nm @ 4400 RPM). This means 1976 BMW 3.3 will have an easier job in driving up hills or pulling heavy equipment than 2008 Chevrolet Matiz. 1976 BMW 3.3 has automatic transmission and 2008 Chevrolet Matiz has manual transmission. 2008 Chevrolet Matiz will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1976 BMW 3.3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 BMW 3.3 2008 Chevrolet Matiz
Make BMW Chevrolet
Model 3.3 Matiz
Year Released 1976 2008
Engine Position Front Front
Engine Size 3295 cc 796 cc
Engine Cylinders 6 cylinders 3 cylinders
Engine Type in-line in-line
Horse Power 194 HP 51 HP
Engine RPM 5500 RPM 6000 RPM
Torque 285 Nm 71 Nm
Torque RPM 4300 RPM 4400 RPM
Engine Bore Size 89 mm 68.5 mm
Engine Stroke Size 86 mm 72 mm
Engine Compression Ratio 9.0:1 9.3:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1494 kg 775 kg
Vehicle Length 4810 mm 3500 mm
Vehicle Width 1760 mm 1500 mm
Vehicle Height 1460 mm 1510 mm
Wheelbase Size 2800 mm 2350 mm
Fuel Tank Capacity 78 L 35 L