1976 BMW 630 vs. 2009 Fiat 500

To start off, 2009 Fiat 500 is newer by 33 year(s). Which means there will be less support and parts availability for 1976 BMW 630. In addition, the cost of maintenance, including insurance, on 1976 BMW 630 would be higher. At 2,986 cc (6 cylinders), 1976 BMW 630 is equipped with a bigger engine. In terms of performance, 1976 BMW 630 (182 HP @ 5800 RPM) has 114 more horse power than 2009 Fiat 500. (68 HP @ 5500 RPM). In normal driving conditions, 1976 BMW 630 should accelerate faster than 2009 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 1976 BMW 630 weights approximately 511 kg more than 2009 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1976 BMW 630 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 BMW 630. However, in wet, icy, snow, or gravel driving conditions, 2009 Fiat 500, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 BMW 630 (255 Nm @ 3500 RPM) has 153 more torque (in Nm) than 2009 Fiat 500. (102 Nm @ 3000 RPM). This means 1976 BMW 630 will have an easier job in driving up hills or pulling heavy equipment than 2009 Fiat 500. 2009 Fiat 500 has automatic transmission and 1976 BMW 630 has manual transmission. 1976 BMW 630 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Fiat 500 will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 BMW 630 2009 Fiat 500
Make BMW Fiat
Model 630 500
Year Released 1976 2009
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2986 cc 1242 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 182 HP 68 HP
Engine RPM 5800 RPM 5500 RPM
Torque 255 Nm 102 Nm
Torque RPM 3500 RPM 3000 RPM
Engine Bore Size 89 mm 70.8 mm
Engine Stroke Size 80 mm 78.9 mm
Engine Compression Ratio 9.0:1 11.1:1
Top Speed 211 km/hour 160 km/hour
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1451 kg 940 kg
Vehicle Length 4760 mm 3550 mm
Vehicle Width 1760 mm 1630 mm
Vehicle Height 1390 mm 1490 mm
Wheelbase Size 2630 mm 2310 mm