1976 BMW 633 vs. 1999 Holden Vectra
To start off, 1999 Holden Vectra is newer by 23 year(s). Which means there will be less support and parts availability for 1976 BMW 633. In addition, the cost of maintenance, including insurance, on 1976 BMW 633 would be higher. At 3,210 cc (6 cylinders), 1976 BMW 633 is equipped with a bigger engine. In terms of performance, 1976 BMW 633 (197 HP @ 5500 RPM) has 29 more horse power than 1999 Holden Vectra. (168 HP @ 5800 RPM). In normal driving conditions, 1976 BMW 633 should accelerate faster than 1999 Holden Vectra. With that said, vehicle weight also plays an important factor in acceleration. 1976 BMW 633 weights approximately 95 kg more than 1999 Holden Vectra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 BMW 633 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 BMW 633. However, in wet, icy, snow, or gravel driving conditions, 1999 Holden Vectra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 BMW 633 (285 Nm @ 4250 RPM) has 35 more torque (in Nm) than 1999 Holden Vectra. (250 Nm @ 3600 RPM). This means 1976 BMW 633 will have an easier job in driving up hills or pulling heavy equipment than 1999 Holden Vectra. 1999 Holden Vectra has automatic transmission and 1976 BMW 633 has manual transmission. 1976 BMW 633 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Holden Vectra will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 BMW 633 | 1999 Holden Vectra | |
Make | BMW | Holden |
Model | 633 | Vectra |
Year Released | 1976 | 1999 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 3210 cc | 2597 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 197 HP | 168 HP |
Engine RPM | 5500 RPM | 5800 RPM |
Torque | 285 Nm | 250 Nm |
Torque RPM | 4250 RPM | 3600 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1470 kg | 1375 kg |
Vehicle Length | 4760 mm | 4500 mm |
Vehicle Width | 1760 mm | 1710 mm |
Vehicle Height | 1390 mm | 1430 mm |
Wheelbase Size | 2630 mm | 2650 mm |