1976 BMW 633 vs. 2008 BMW 530

To start off, 2008 BMW 530 is newer by 32 year(s). Which means there will be less support and parts availability for 1976 BMW 633. In addition, the cost of maintenance, including insurance, on 1976 BMW 633 would be higher. At 3,210 cc (6 cylinders), 1976 BMW 633 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 BMW 530 weights approximately 138 kg more than 1976 BMW 633.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 BMW 530 (300 Nm @ 3500 RPM) has 15 more torque (in Nm) than 1976 BMW 633. (285 Nm @ 4250 RPM). This means 2008 BMW 530 will have an easier job in driving up hills or pulling heavy equipment than 1976 BMW 633. 2008 BMW 530 has automatic transmission and 1976 BMW 633 has manual transmission. 1976 BMW 633 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 BMW 530 will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 BMW 633 2008 BMW 530
Make BMW BMW
Model 633 530
Year Released 1976 2008
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 3210 cc 2979 cc
Valves per Cylinder 2 valves 4 valves
Horse Power 197 HP 0 HP
Torque 285 Nm 300 Nm
Torque RPM 4250 RPM 3500 RPM
Engine Compression Ratio 9.0:1 10.2:1
Top Speed 211 km/hour 250 km/hour
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1470 kg 1608 kg
Vehicle Length 4760 mm 4870 mm
Vehicle Height 1390 mm 1470 mm
Wheelbase Size 2630 mm 2840 mm
Fuel Tank Capacity 70 L 70 L