1976 BMW 633 vs. 2010 Chrysler Town & Country
To start off, 2010 Chrysler Town & Country is newer by 34 year(s). Which means there will be less support and parts availability for 1976 BMW 633. In addition, the cost of maintenance, including insurance, on 1976 BMW 633 would be higher. At 4,000 cc (6 cylinders), 2010 Chrysler Town & Country is equipped with a bigger engine. In terms of performance, 2010 Chrysler Town & Country (251 HP @ 6000 RPM) has 54 more horse power than 1976 BMW 633. (197 HP @ 5500 RPM) In normal driving conditions, 2010 Chrysler Town & Country should accelerate faster than 1976 BMW 633. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Town & Country weights approximately 626 kg more than 1976 BMW 633. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 BMW 633 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 BMW 633. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Town & Country, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Town & Country (351 Nm @ 4100 RPM) has 66 more torque (in Nm) than 1976 BMW 633. (285 Nm @ 4250 RPM). This means 2010 Chrysler Town & Country will have an easier job in driving up hills or pulling heavy equipment than 1976 BMW 633. 2010 Chrysler Town & Country has automatic transmission and 1976 BMW 633 has manual transmission. 1976 BMW 633 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Town & Country will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 BMW 633 | 2010 Chrysler Town & Country | |
Make | BMW | Chrysler |
Model | 633 | Town & Country |
Year Released | 1976 | 2010 |
Body Type | Coupe | Minivan |
Engine Position | Front | Front |
Engine Size | 3210 cc | 4000 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 197 HP | 251 HP |
Engine RPM | 5500 RPM | 6000 RPM |
Torque | 285 Nm | 351 Nm |
Torque RPM | 4250 RPM | 4100 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1470 kg | 2096 kg |
Vehicle Length | 4760 mm | 5144 mm |
Vehicle Width | 1760 mm | 1953 mm |
Vehicle Height | 1390 mm | 1814 mm |
Wheelbase Size | 2630 mm | 3078 mm |
Fuel Tank Capacity | 70 L | 76 L |