1976 Chevrolet Caprice vs. 2006 Mazda Drifter

To start off, 2006 Mazda Drifter is newer by 30 year(s). Which means there will be less support and parts availability for 1976 Chevrolet Caprice. In addition, the cost of maintenance, including insurance, on 1976 Chevrolet Caprice would be higher. At 5,736 cc (8 cylinders), 1976 Chevrolet Caprice is equipped with a bigger engine. In terms of performance, 1976 Chevrolet Caprice (168 HP @ 3800 RPM) has 45 more horse power than 2006 Mazda Drifter. (123 HP @ 4600 RPM). In normal driving conditions, 1976 Chevrolet Caprice should accelerate faster than 2006 Mazda Drifter.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Chevrolet Caprice (366 Nm @ 2400 RPM) has 160 more torque (in Nm) than 2006 Mazda Drifter. (206 Nm @ 3500 RPM). This means 1976 Chevrolet Caprice will have an easier job in driving up hills or pulling heavy equipment than 2006 Mazda Drifter. 1976 Chevrolet Caprice has automatic transmission and 2006 Mazda Drifter has manual transmission. 2006 Mazda Drifter will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1976 Chevrolet Caprice will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Chevrolet Caprice 2006 Mazda Drifter
Make Chevrolet Mazda
Model Caprice Drifter
Year Released 1976 2006
Engine Position Front Front
Engine Size 5736 cc 2606 cc
Horse Power 168 HP 123 HP
Engine RPM 3800 RPM 4600 RPM
Torque 366 Nm 206 Nm
Torque RPM 2400 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Vehicle Length 5460 mm 4710 mm
Vehicle Height 1480 mm 1490 mm
Wheelbase Size 2950 mm 3010 mm