1976 Chrysler 1609 vs. 1967 Fiat 124
To start off, 1976 Chrysler 1609 is newer by 9 year(s). Which means there will be less support and parts availability for 1967 Fiat 124. In addition, the cost of maintenance, including insurance, on 1967 Fiat 124 would be higher. At 1,918 cc (4 cylinders), 1976 Chrysler 1609 is equipped with a bigger engine. In terms of performance, both vehicles can yield 59 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1976 Chrysler 1609 weights approximately 315 kg more than 1967 Fiat 124.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Chrysler 1609 (126 Nm @ 2100 RPM) has 37 more torque (in Nm) than 1967 Fiat 124. (89 Nm @ 3400 RPM). This means 1976 Chrysler 1609 will have an easier job in driving up hills or pulling heavy equipment than 1967 Fiat 124.
Compare all specifications:
| 1976 Chrysler 1609 | 1967 Fiat 124 | |
| Make | Chrysler | Fiat |
| Model | 1609 | 124 |
| Year Released | 1976 | 1967 |
| Engine Position | Front | Front |
| Engine Size | 1918 cc | 1197 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 59 HP | 59 HP |
| Engine RPM | 4000 RPM | 5600 RPM |
| Torque | 126 Nm | 89 Nm |
| Torque RPM | 2100 RPM | 3400 RPM |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1225 kg | 910 kg |
| Vehicle Length | 4530 mm | 4050 mm |
| Vehicle Width | 1740 mm | 1630 mm |
| Vehicle Height | 1450 mm | 1420 mm |
| Wheelbase Size | 2670 mm | 2500 mm |
