1976 Chrysler 1609 vs. 1996 Mercedes-Benz S

To start off, 1996 Mercedes-Benz S is newer by 20 year(s). Which means there will be less support and parts availability for 1976 Chrysler 1609. In addition, the cost of maintenance, including insurance, on 1976 Chrysler 1609 would be higher. At 3,199 cc (6 cylinders), 1996 Mercedes-Benz S is equipped with a bigger engine. In terms of performance, 1996 Mercedes-Benz S (228 HP @ 5500 RPM) has 120 more horse power than 1976 Chrysler 1609. (108 HP @ 5800 RPM) In normal driving conditions, 1996 Mercedes-Benz S should accelerate faster than 1976 Chrysler 1609. With that said, vehicle weight also plays an important factor in acceleration. 1996 Mercedes-Benz S weights approximately 771 kg more than 1976 Chrysler 1609. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Mercedes-Benz S (315 Nm @ 3750 RPM) has 156 more torque (in Nm) than 1976 Chrysler 1609. (159 Nm @ 3400 RPM). This means 1996 Mercedes-Benz S will have an easier job in driving up hills or pulling heavy equipment than 1976 Chrysler 1609. 1996 Mercedes-Benz S has automatic transmission and 1976 Chrysler 1609 has manual transmission. 1976 Chrysler 1609 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Mercedes-Benz S will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Chrysler 1609 1996 Mercedes-Benz S
Make Chrysler Mercedes-Benz
Model 1609 S
Year Released 1976 1996
Engine Position Front Front
Engine Size 1980 cc 3199 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 108 HP 228 HP
Engine RPM 5800 RPM 5500 RPM
Torque 159 Nm 315 Nm
Torque RPM 3400 RPM 3750 RPM
Engine Bore Size 91.7 mm 89.9 mm
Engine Stroke Size 75 mm 84 mm
Engine Compression Ratio 9.5:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1125 kg 1896 kg
Vehicle Length 4530 mm 5120 mm
Vehicle Width 1740 mm 1890 mm
Vehicle Height 1450 mm 1490 mm
Wheelbase Size 2680 mm 2520 mm
Fuel Tank Capacity 65 L 70 L