1976 Chrysler 1609 vs. 2006 Mazda Tribute

To start off, 2006 Mazda Tribute is newer by 30 year(s). Which means there will be less support and parts availability for 1976 Chrysler 1609. In addition, the cost of maintenance, including insurance, on 1976 Chrysler 1609 would be higher. At 2,966 cc (6 cylinders), 2006 Mazda Tribute is equipped with a bigger engine. In terms of performance, 2006 Mazda Tribute (200 HP @ 6000 RPM) has 92 more horse power than 1976 Chrysler 1609. (108 HP @ 5800 RPM) In normal driving conditions, 2006 Mazda Tribute should accelerate faster than 1976 Chrysler 1609. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mazda Tribute weights approximately 4 kg more than 1976 Chrysler 1609. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Mazda Tribute is four wheel drive (4WD), it will have significant more traction and grip than 1976 Chrysler 1609. In wet, icy, snow, or gravel driving conditions, 2006 Mazda Tribute will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mazda Tribute (262 Nm @ 4850 RPM) has 103 more torque (in Nm) than 1976 Chrysler 1609. (159 Nm @ 3400 RPM). This means 2006 Mazda Tribute will have an easier job in driving up hills or pulling heavy equipment than 1976 Chrysler 1609. 2006 Mazda Tribute has automatic transmission and 1976 Chrysler 1609 has manual transmission. 1976 Chrysler 1609 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Mazda Tribute will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Chrysler 1609 2006 Mazda Tribute
Make Chrysler Mazda
Model 1609 Tribute
Year Released 1976 2006
Engine Position Front Front
Engine Size 1980 cc 2966 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 108 HP 200 HP
Engine RPM 5800 RPM 6000 RPM
Torque 159 Nm 262 Nm
Torque RPM 3400 RPM 4850 RPM
Engine Compression Ratio 9.5:1 8.8:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1125 kg 1129 kg
Vehicle Length 4530 mm 4440 mm
Vehicle Width 1740 mm 1840 mm
Vehicle Height 1450 mm 1780 mm
Wheelbase Size 2680 mm 2630 mm
Fuel Tank Capacity 65 L 62 L