1976 Chrysler 1609 vs. 2007 Opel Vectra

To start off, 2007 Opel Vectra is newer by 31 year(s). Which means there will be less support and parts availability for 1976 Chrysler 1609. In addition, the cost of maintenance, including insurance, on 1976 Chrysler 1609 would be higher. At 2,958 cc (6 cylinders), 2007 Opel Vectra is equipped with a bigger engine. In terms of performance, 2007 Opel Vectra (175 HP @ 4000 RPM) has 67 more horse power than 1976 Chrysler 1609. (108 HP @ 5800 RPM) In normal driving conditions, 2007 Opel Vectra should accelerate faster than 1976 Chrysler 1609. With that said, vehicle weight also plays an important factor in acceleration. 2007 Opel Vectra weights approximately 580 kg more than 1976 Chrysler 1609. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1976 Chrysler 1609 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Chrysler 1609. However, in wet, icy, snow, or gravel driving conditions, 2007 Opel Vectra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Opel Vectra (370 Nm @ 1900 RPM) has 211 more torque (in Nm) than 1976 Chrysler 1609. (159 Nm @ 3400 RPM). This means 2007 Opel Vectra will have an easier job in driving up hills or pulling heavy equipment than 1976 Chrysler 1609. 2007 Opel Vectra has automatic transmission and 1976 Chrysler 1609 has manual transmission. 1976 Chrysler 1609 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2007 Opel Vectra will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Chrysler 1609 2007 Opel Vectra
Make Chrysler Opel
Model 1609 Vectra
Year Released 1976 2007
Engine Position Front Front
Engine Size 1980 cc 2958 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 108 HP 175 HP
Engine RPM 5800 RPM 4000 RPM
Torque 159 Nm 370 Nm
Torque RPM 3400 RPM 1900 RPM
Engine Compression Ratio 9.5:1 18.5:1
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1125 kg 1705 kg
Vehicle Length 4530 mm 4830 mm
Vehicle Width 1740 mm 1800 mm
Vehicle Height 1450 mm 1510 mm
Wheelbase Size 2680 mm 2840 mm
Fuel Tank Capacity 65 L 60 L