1976 Chrysler Centura vs. 1976 Opel Kadett

To start off, both 1976 Chrysler Centura and 1976 Opel Kadett were released in the same year (1976). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,981 cc (4 cylinders), 1976 Chrysler Centura is equipped with a bigger engine. In terms of performance, 1976 Chrysler Centura (118 HP @ 5700 RPM) has 59 more horse power than 1976 Opel Kadett. (59 HP @ 5400 RPM). In normal driving conditions, 1976 Chrysler Centura should accelerate faster than 1976 Opel Kadett. With that said, vehicle weight also plays an important factor in acceleration. 1976 Chrysler Centura weights approximately 295 kg more than 1976 Opel Kadett. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Chrysler Centura (175 Nm @ 3500 RPM) has 85 more torque (in Nm) than 1976 Opel Kadett. (90 Nm @ 2600 RPM). This means 1976 Chrysler Centura will have an easier job in driving up hills or pulling heavy equipment than 1976 Opel Kadett.

Compare all specifications:

1976 Chrysler Centura 1976 Opel Kadett
Make Chrysler Opel
Model Centura Kadett
Year Released 1976 1976
Engine Position Front Front
Engine Size 1981 cc 1196 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 118 HP 59 HP
Engine RPM 5700 RPM 5400 RPM
Torque 175 Nm 90 Nm
Torque RPM 3500 RPM 2600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1115 kg 820 kg
Vehicle Length 4590 mm 4130 mm
Vehicle Width 1740 mm 1590 mm
Vehicle Height 1440 mm 1380 mm
Wheelbase Size 2680 mm 2400 mm