1976 Chrysler Centura vs. 2008 GMC Acadia

To start off, 2008 GMC Acadia is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Chrysler Centura. In addition, the cost of maintenance, including insurance, on 1976 Chrysler Centura would be higher. At 3,600 cc (6 cylinders), 2008 GMC Acadia is equipped with a bigger engine. In terms of performance, 2008 GMC Acadia (275 HP @ 6600 RPM) has 157 more horse power than 1976 Chrysler Centura. (118 HP @ 5700 RPM) In normal driving conditions, 2008 GMC Acadia should accelerate faster than 1976 Chrysler Centura. With that said, vehicle weight also plays an important factor in acceleration. 2008 GMC Acadia weights approximately 1320 kg more than 1976 Chrysler Centura. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 GMC Acadia is four wheel drive (4WD), it will have significant more traction and grip than 1976 Chrysler Centura. In wet, icy, snow, or gravel driving conditions, 2008 GMC Acadia will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 GMC Acadia (340 Nm @ 3200 RPM) has 165 more torque (in Nm) than 1976 Chrysler Centura. (175 Nm @ 3500 RPM). This means 2008 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1976 Chrysler Centura. 2008 GMC Acadia has automatic transmission and 1976 Chrysler Centura has manual transmission. 1976 Chrysler Centura will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Chrysler Centura 2008 GMC Acadia
Make Chrysler GMC
Model Centura Acadia
Year Released 1976 2008
Engine Position Front Front
Engine Size 1981 cc 3600 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 118 HP 275 HP
Engine RPM 5700 RPM 6600 RPM
Torque 175 Nm 340 Nm
Torque RPM 3500 RPM 3200 RPM
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Vehicle Weight 1115 kg 2435 kg
Vehicle Length 4590 mm 5100 mm
Vehicle Width 1740 mm 1990 mm
Vehicle Height 1440 mm 1780 mm
Wheelbase Size 2680 mm 3030 mm