1976 Ferrari 308 vs. 2010 Mazda RX-8
To start off, 2010 Mazda RX-8 is newer by 34 year(s). Which means there will be less support and parts availability for 1976 Ferrari 308. In addition, the cost of maintenance, including insurance, on 1976 Ferrari 308 would be higher. At 2,927 cc (8 cylinders), 1976 Ferrari 308 is equipped with a bigger engine. In terms of performance, 1976 Ferrari 308 (247 HP @ 7700 RPM) has 15 more horse power than 2010 Mazda RX-8. (232 HP @ 8500 RPM). In normal driving conditions, 1976 Ferrari 308 should accelerate faster than 2010 Mazda RX-8. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda RX-8 weights approximately 25 kg more than 1976 Ferrari 308.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Ferrari 308 (290 Nm @ 5500 RPM) has 75 more torque (in Nm) than 2010 Mazda RX-8. (215 Nm @ 5500 RPM). This means 1976 Ferrari 308 will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda RX-8.
Compare all specifications:
1976 Ferrari 308 | 2010 Mazda RX-8 | |
Make | Ferrari | Mazda |
Model | 308 | RX-8 |
Year Released | 1976 | 2010 |
Body Type | Coupe | Coupe |
Engine Position | Middle | Front |
Engine Size | 2927 cc | 1300 cc |
Engine Type | V | dual-disk rotary |
Horse Power | 247 HP | 232 HP |
Engine RPM | 7700 RPM | 8500 RPM |
Torque | 290 Nm | 215 Nm |
Torque RPM | 5500 RPM | 5500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 4 seats |
Vehicle Weight | 1365 kg | 1390 kg |
Vehicle Length | 4310 mm | 4460 mm |
Vehicle Width | 1720 mm | 1770 mm |
Vehicle Height | 1220 mm | 1341 mm |
Wheelbase Size | 2560 mm | 2700 mm |