1976 Fiat 133 vs. 2008 SsangYong Stavic
To start off, 2008 SsangYong Stavic is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Fiat 133. In addition, the cost of maintenance, including insurance, on 1976 Fiat 133 would be higher. At 3,199 cc (6 cylinders), 2008 SsangYong Stavic is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 SsangYong Stavic weights approximately 1344 kg more than 1976 Fiat 133.
Because 2008 SsangYong Stavic is four wheel drive (4WD), it will have significant more traction and grip than 1976 Fiat 133. In wet, icy, snow, or gravel driving conditions, 2008 SsangYong Stavic will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 SsangYong Stavic (312 Nm @ 4600 RPM) has 258 more torque (in Nm) than 1976 Fiat 133. (54 Nm @ 3200 RPM). This means 2008 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1976 Fiat 133.
Compare all specifications:
| 1976 Fiat 133 | 2008 SsangYong Stavic | |
| Make | Fiat | SsangYong |
| Model | 133 | Stavic |
| Year Released | 1976 | 2008 |
| Engine Position | Rear | Front |
| Engine Size | 843 cc | 3199 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 34 HP | 0 HP |
| Torque | 54 Nm | 312 Nm |
| Torque RPM | 3200 RPM | 4600 RPM |
| Engine Compression Ratio | 7.9:1 | 10.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | 4WD |
| Vehicle Weight | 690 kg | 2034 kg |
| Vehicle Length | 3460 mm | 5130 mm |
| Vehicle Width | 1430 mm | 1830 mm |
| Vehicle Height | 1330 mm | 1920 mm |
| Wheelbase Size | 2030 mm | 3010 mm |
