1976 Ford Cortina vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Ford Cortina. In addition, the cost of maintenance, including insurance, on 1976 Ford Cortina would be higher. At 2,294 cc (6 cylinders), 1976 Ford Cortina is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 90 kg more than 1976 Ford Cortina.

Because 1976 Ford Cortina is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Ford Cortina. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Ford Cortina (177 Nm @ 3000 RPM) has 31 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 1976 Ford Cortina will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

1976 Ford Cortina 2008 Mazda 3
Make Ford Mazda
Model Cortina 3
Year Released 1976 2008
Engine Position Front Front
Engine Size 2294 cc 1597 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 107 HP 0 HP
Torque 177 Nm 146 Nm
Torque RPM 3000 RPM 4000 RPM
Engine Bore Size 90 mm 78 mm
Engine Stroke Size 60.1 mm 83.6 mm
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1090 kg 1180 kg
Vehicle Length 4390 mm 4500 mm
Vehicle Width 1710 mm 1760 mm
Vehicle Height 1370 mm 1470 mm
Wheelbase Size 2590 mm 2650 mm
Fuel Tank Capacity 54 L 55 L