1976 Ford Cortina vs. 2013 Chrysler 200 CONVERTIBLE
To start off, 2013 Chrysler 200 CONVERTIBLE is newer by 37 year(s). Which means there will be less support and parts availability for 1976 Ford Cortina. In addition, the cost of maintenance, including insurance, on 1976 Ford Cortina would be higher. At 3,600 cc (6 cylinders), 2013 Chrysler 200 CONVERTIBLE is equipped with a bigger engine. In terms of performance, 2013 Chrysler 200 CONVERTIBLE (279 HP @ 6400 RPM) has 206 more horse power than 1976 Ford Cortina. (73 HP @ 5500 RPM) In normal driving conditions, 2013 Chrysler 200 CONVERTIBLE should accelerate faster than 1976 Ford Cortina. With that said, vehicle weight also plays an important factor in acceleration. 2013 Chrysler 200 CONVERTIBLE weights approximately 587 kg more than 1976 Ford Cortina. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Ford Cortina is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Ford Cortina. However, in wet, icy, snow, or gravel driving conditions, 2013 Chrysler 200 CONVERTIBLE, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Chrysler 200 CONVERTIBLE (353 Nm @ 4400 RPM) has 236 more torque (in Nm) than 1976 Ford Cortina. (117 Nm @ 2700 RPM). This means 2013 Chrysler 200 CONVERTIBLE will have an easier job in driving up hills or pulling heavy equipment than 1976 Ford Cortina. 2013 Chrysler 200 CONVERTIBLE has automatic transmission and 1976 Ford Cortina has manual transmission. 1976 Ford Cortina will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Chrysler 200 CONVERTIBLE will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Ford Cortina | 2013 Chrysler 200 CONVERTIBLE | |
Make | Ford | Chrysler |
Model | Cortina | 200 CONVERTIBLE |
Year Released | 1976 | 2013 |
Engine Position | Front | Front |
Engine Size | 1593 cc | 3600 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 73 HP | 279 HP |
Engine RPM | 5500 RPM | 6400 RPM |
Torque | 117 Nm | 353 Nm |
Torque RPM | 2700 RPM | 4400 RPM |
Engine Bore Size | 87.7 mm | 96 mm |
Engine Stroke Size | 66 mm | 83 mm |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1035 kg | 1622 kg |
Vehicle Length | 4390 mm | 4870 mm |
Vehicle Width | 1710 mm | 2121 mm |
Vehicle Height | 1370 mm | 1482 mm |
Wheelbase Size | 2540 mm | 2765 mm |
Fuel Tank Capacity | 54 L | 64 L |