1976 Ford Torino vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 34 year(s). Which means there will be less support and parts availability for 1976 Ford Torino. In addition, the cost of maintenance, including insurance, on 1976 Ford Torino would be higher. At 4,090 cc (6 cylinders), 1976 Ford Torino is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (187 HP @ 5500 RPM) has 92 more horse power than 1976 Ford Torino. (95 HP @ 3600 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1976 Ford Torino. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 260 kg more than 1976 Ford Torino. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Ford Torino is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Ford Torino. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (259 Nm @ 4000 RPM) has 14 more torque (in Nm) than 1976 Ford Torino. (245 Nm @ 1600 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1976 Ford Torino. 2010 Chrysler Sebring has automatic transmission and 1976 Ford Torino has manual transmission. 1976 Ford Torino will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Ford Torino | 2010 Chrysler Sebring | |
Make | Ford | Chrysler |
Model | Torino | Sebring |
Year Released | 1976 | 2010 |
Engine Position | Front | Front |
Engine Size | 4090 cc | 2736 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 95 HP | 187 HP |
Engine RPM | 3600 RPM | 5500 RPM |
Torque | 245 Nm | 259 Nm |
Torque RPM | 1600 RPM | 4000 RPM |
Engine Bore Size | 93.5 mm | 86 mm |
Engine Stroke Size | 99.3 mm | 78.5 mm |
Engine Compression Ratio | 8.0:1 | 9.9:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1650 kg | 1910 kg |
Vehicle Length | 5470 mm | 4930 mm |
Vehicle Width | 2020 mm | 1820 mm |
Vehicle Height | 1340 mm | 1490 mm |
Wheelbase Size | 2760 mm | 2770 mm |
Fuel Tank Capacity | 87 L | 64 L |