1976 Holden Statesman vs. 1987 Chevrolet Beretta
To start off, 1987 Chevrolet Beretta is newer by 11 year(s). Which means there will be less support and parts availability for 1976 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1976 Holden Statesman would be higher. At 5,042 cc (8 cylinders), 1976 Holden Statesman is equipped with a bigger engine. In terms of performance, 1976 Holden Statesman (213 HP @ 4800 RPM) has 84 more horse power than 1987 Chevrolet Beretta. (129 HP @ 4500 RPM). In normal driving conditions, 1976 Holden Statesman should accelerate faster than 1987 Chevrolet Beretta. With that said, vehicle weight also plays an important factor in acceleration. 1976 Holden Statesman weights approximately 315 kg more than 1987 Chevrolet Beretta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Holden Statesman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Holden Statesman. However, in wet, icy, snow, or gravel driving conditions, 1987 Chevrolet Beretta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Holden Statesman (400 Nm @ 3100 RPM) has 183 more torque (in Nm) than 1987 Chevrolet Beretta. (217 Nm @ 3600 RPM). This means 1976 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 1987 Chevrolet Beretta. 1987 Chevrolet Beretta has automatic transmission and 1976 Holden Statesman has manual transmission. 1976 Holden Statesman will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1987 Chevrolet Beretta will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Holden Statesman | 1987 Chevrolet Beretta | |
Make | Holden | Chevrolet |
Model | Statesman | Beretta |
Year Released | 1976 | 1987 |
Engine Position | Front | Front |
Engine Size | 5042 cc | 2843 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 213 HP | 129 HP |
Engine RPM | 4800 RPM | 4500 RPM |
Torque | 400 Nm | 217 Nm |
Torque RPM | 3100 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1545 kg | 1230 kg |
Vehicle Length | 5190 mm | 4760 mm |
Vehicle Width | 1890 mm | 1740 mm |
Vehicle Height | 1400 mm | 1410 mm |
Wheelbase Size | 2900 mm | 2630 mm |