1976 Holden Statesman vs. 2005 Toyota MR2

To start off, 2005 Toyota MR2 is newer by 29 year(s). Which means there will be less support and parts availability for 1976 Holden Statesman. In addition, the cost of maintenance, including insurance, on 1976 Holden Statesman would be higher. At 5,040 cc (8 cylinders), 1976 Holden Statesman is equipped with a bigger engine. In terms of performance, 1976 Holden Statesman (238 HP @ 4600 RPM) has 100 more horse power than 2005 Toyota MR2. (138 HP @ 5200 RPM). In normal driving conditions, 1976 Holden Statesman should accelerate faster than 2005 Toyota MR2. With that said, vehicle weight also plays an important factor in acceleration. 1976 Holden Statesman weights approximately 539 kg more than 2005 Toyota MR2. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Holden Statesman (427 Nm) has 257 more torque (in Nm) than 2005 Toyota MR2. (170 Nm). This means 1976 Holden Statesman will have an easier job in driving up hills or pulling heavy equipment than 2005 Toyota MR2.

Compare all specifications:

1976 Holden Statesman 2005 Toyota MR2
Make Holden Toyota
Model Statesman MR2
Year Released 1976 2005
Engine Position Front Middle
Engine Size 5040 cc 1802 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 238 HP 138 HP
Engine RPM 4600 RPM 5200 RPM
Torque 427 Nm 170 Nm
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1535 kg 996 kg
Vehicle Length 5190 mm 3890 mm
Vehicle Width 1890 mm 1700 mm
Vehicle Height 1380 mm 1250 mm
Wheelbase Size 2900 mm 2500 mm