1976 Holden Sunbird vs. 1987 Mazda 929

To start off, 1987 Mazda 929 is newer by 11 year(s). Which means there will be less support and parts availability for 1976 Holden Sunbird. In addition, the cost of maintenance, including insurance, on 1976 Holden Sunbird would be higher. At 2,183 cc (4 cylinders), 1987 Mazda 929 is equipped with a bigger engine. In terms of performance, 1987 Mazda 929 (114 HP @ 5000 RPM) has 17 more horse power than 1976 Holden Sunbird. (97 HP @ 5200 RPM) In normal driving conditions, 1987 Mazda 929 should accelerate faster than 1976 Holden Sunbird. With that said, vehicle weight also plays an important factor in acceleration. 1987 Mazda 929 weights approximately 150 kg more than 1976 Holden Sunbird. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1987 Mazda 929 (184 Nm @ 3000 RPM) has 27 more torque (in Nm) than 1976 Holden Sunbird. (157 Nm @ 3600 RPM). This means 1987 Mazda 929 will have an easier job in driving up hills or pulling heavy equipment than 1976 Holden Sunbird.

Compare all specifications:

1976 Holden Sunbird 1987 Mazda 929
Make Holden Mazda
Model Sunbird 929
Year Released 1976 1987
Engine Position Front Front
Engine Size 1897 cc 2183 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 97 HP 114 HP
Engine RPM 5200 RPM 5000 RPM
Torque 157 Nm 184 Nm
Torque RPM 3600 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1160 kg 1310 kg
Vehicle Length 4500 mm 4890 mm
Vehicle Width 1710 mm 1710 mm
Vehicle Height 1340 mm 1430 mm
Wheelbase Size 2590 mm 2720 mm