1976 Lamborghini Urraco vs. 1982 Lancia Trevi

To start off, 1982 Lancia Trevi is newer by 6 year(s). Which means there will be less support and parts availability for 1976 Lamborghini Urraco. In addition, the cost of maintenance, including insurance, on 1976 Lamborghini Urraco would be higher. At 2,995 cc (8 cylinders), 1976 Lamborghini Urraco is equipped with a bigger engine. In terms of performance, 1976 Lamborghini Urraco (260 HP) has 160 more horse power than 1982 Lancia Trevi. (100 HP). In normal driving conditions, 1976 Lamborghini Urraco should accelerate faster than 1982 Lancia Trevi. With that said, vehicle weight also plays an important factor in acceleration. 1976 Lamborghini Urraco weights approximately 155 kg more than 1982 Lancia Trevi. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1976 Lamborghini Urraco is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Lamborghini Urraco. However, in wet, icy, snow, or gravel driving conditions, 1982 Lancia Trevi, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Lamborghini Urraco (273 Nm) has 139 more torque (in Nm) than 1982 Lancia Trevi. (134 Nm). This means 1976 Lamborghini Urraco will have an easier job in driving up hills or pulling heavy equipment than 1982 Lancia Trevi. 1982 Lancia Trevi has automatic transmission and 1976 Lamborghini Urraco has manual transmission. 1976 Lamborghini Urraco will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1982 Lancia Trevi will be easier to drive especially in heavy traffic.

Compare all specifications:

1976 Lamborghini Urraco 1982 Lancia Trevi
Make Lamborghini Lancia
Model Urraco Trevi
Year Released 1976 1982
Body Type Coupe Sedan
Engine Position Middle Front
Engine Size 2995 cc 1585 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 260 HP 100 HP
Torque 273 Nm 134 Nm
Engine Bore Size 86.1 mm 84 mm
Engine Stroke Size 64.5 mm 71.5 mm
Engine Compression Ratio 10.1:1 9.4:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1300 kg 1145 kg
Wheelbase Size 2550 mm 2550 mm
Fuel Tank Capacity 93 L 52 L