1976 Mercedes-Benz 200 vs. 2010 Chevrolet Impala
To start off, 2010 Chevrolet Impala is newer by 34 year(s). Which means there will be less support and parts availability for 1976 Mercedes-Benz 200. In addition, the cost of maintenance, including insurance, on 1976 Mercedes-Benz 200 would be higher. At 3,500 cc (6 cylinders), 2010 Chevrolet Impala is equipped with a bigger engine. In terms of performance, 2010 Chevrolet Impala (211 HP @ 5800 RPM) has 107 more horse power than 1976 Mercedes-Benz 200. (104 HP @ 5200 RPM) In normal driving conditions, 2010 Chevrolet Impala should accelerate faster than 1976 Mercedes-Benz 200. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chevrolet Impala weights approximately 273 kg more than 1976 Mercedes-Benz 200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Mercedes-Benz 200 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Mercedes-Benz 200. However, in wet, icy, snow, or gravel driving conditions, 2010 Chevrolet Impala, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chevrolet Impala (293 Nm @ 4000 RPM) has 129 more torque (in Nm) than 1976 Mercedes-Benz 200. (164 Nm @ 3000 RPM). This means 2010 Chevrolet Impala will have an easier job in driving up hills or pulling heavy equipment than 1976 Mercedes-Benz 200. 2010 Chevrolet Impala has automatic transmission and 1976 Mercedes-Benz 200 has manual transmission. 1976 Mercedes-Benz 200 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chevrolet Impala will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Mercedes-Benz 200 | 2010 Chevrolet Impala | |
Make | Mercedes-Benz | Chevrolet |
Model | 200 | Impala |
Year Released | 1976 | 2010 |
Engine Position | Front | Front |
Engine Size | 1997 cc | 3500 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 104 HP | 211 HP |
Engine RPM | 5200 RPM | 5800 RPM |
Torque | 164 Nm | 293 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1340 kg | 1613 kg |
Vehicle Length | 4730 mm | 5090 mm |
Vehicle Width | 1790 mm | 1852 mm |
Vehicle Height | 1450 mm | 1491 mm |
Wheelbase Size | 2800 mm | 2807 mm |
Fuel Tank Capacity | 65 L | 64 L |