1976 Mercedes-Benz 230 vs. 2011 Fiat Panda
To start off, 2011 Fiat Panda is newer by 35 year(s). Which means there will be less support and parts availability for 1976 Mercedes-Benz 230. In addition, the cost of maintenance, including insurance, on 1976 Mercedes-Benz 230 would be higher. At 2,307 cc (4 cylinders), 1976 Mercedes-Benz 230 is equipped with a bigger engine. In terms of performance, 1976 Mercedes-Benz 230 (109 HP @ 4800 RPM) has 50 more horse power than 2011 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 1976 Mercedes-Benz 230 should accelerate faster than 2011 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1976 Mercedes-Benz 230 weights approximately 231 kg more than 2011 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Mercedes-Benz 230 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Mercedes-Benz 230. However, in wet, icy, snow, or gravel driving conditions, 2011 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Mercedes-Benz 230 (185 Nm @ 3000 RPM) has 83 more torque (in Nm) than 2011 Fiat Panda. (102 Nm @ 2500 RPM). This means 1976 Mercedes-Benz 230 will have an easier job in driving up hills or pulling heavy equipment than 2011 Fiat Panda. 2011 Fiat Panda has automatic transmission and 1976 Mercedes-Benz 230 has manual transmission. 1976 Mercedes-Benz 230 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Fiat Panda will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Mercedes-Benz 230 | 2011 Fiat Panda | |
Make | Mercedes-Benz | Fiat |
Model | 230 | Panda |
Year Released | 1976 | 2011 |
Engine Position | Front | Front |
Engine Size | 2307 cc | 1242 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 109 HP | 59 HP |
Engine RPM | 4800 RPM | 5000 RPM |
Torque | 185 Nm | 102 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Engine Bore Size | 93.7 mm | 70.8 mm |
Engine Stroke Size | 83.6 mm | 78.9 mm |
Engine Compression Ratio | 9.0:1 | 9.8:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1356 kg | 1125 kg |
Vehicle Length | 4730 mm | 3540 mm |
Vehicle Width | 1790 mm | 1600 mm |
Vehicle Height | 1450 mm | 1620 mm |
Wheelbase Size | 2800 mm | 2310 mm |
Fuel Tank Capacity | 65 L | 30 L |