1977 Alpine A 110 vs. 1999 Peugeot 607

To start off, 1999 Peugeot 607 is newer by 22 year(s). Which means there will be less support and parts availability for 1977 Alpine A 110. In addition, the cost of maintenance, including insurance, on 1977 Alpine A 110 would be higher. At 2,304 cc (4 cylinders), 1999 Peugeot 607 is equipped with a bigger engine. In terms of performance, 1999 Peugeot 607 (131 HP @ 4000 RPM) has 36 more horse power than 1977 Alpine A 110. (95 HP @ 6000 RPM) In normal driving conditions, 1999 Peugeot 607 should accelerate faster than 1977 Alpine A 110. With that said, vehicle weight also plays an important factor in acceleration. 1999 Peugeot 607 weights approximately 800 kg more than 1977 Alpine A 110. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1977 Alpine A 110 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Alpine A 110. However, in wet, icy, snow, or gravel driving conditions, 1999 Peugeot 607, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1999 Peugeot 607 (317 Nm @ 2000 RPM) has 189 more torque (in Nm) than 1977 Alpine A 110. (128 Nm @ 3000 RPM). This means 1999 Peugeot 607 will have an easier job in driving up hills or pulling heavy equipment than 1977 Alpine A 110. 1999 Peugeot 607 has automatic transmission and 1977 Alpine A 110 has manual transmission. 1977 Alpine A 110 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Peugeot 607 will be easier to drive especially in heavy traffic.

Compare all specifications:

1977 Alpine A 110 1999 Peugeot 607
Make Alpine Peugeot
Model A 110 607
Year Released 1977 1999
Body Type Coupe Sedan
Engine Position Rear Front
Engine Size 1647 cc 2304 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 95 HP 131 HP
Engine RPM 6000 RPM 4000 RPM
Torque 128 Nm 317 Nm
Torque RPM 3000 RPM 2000 RPM
Engine Compression Ratio 9.3:1 18.0:1
Fuel Type Gasoline Diesel
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 730 kg 1530 kg
Vehicle Length 3860 mm 4880 mm
Vehicle Width 1470 mm 1840 mm
Vehicle Height 1140 mm 1470 mm
Wheelbase Size 2140 mm 2810 mm
Fuel Tank Capacity 62 L 80 L