1977 AMC Matador vs. 2010 Chrysler PT Cruiser
To start off, 2010 Chrysler PT Cruiser is newer by 33 year(s). Which means there will be less support and parts availability for 1977 AMC Matador. In addition, the cost of maintenance, including insurance, on 1977 AMC Matador would be higher. At 4,982 cc (8 cylinders), 1977 AMC Matador is equipped with a bigger engine. In terms of performance, 2010 Chrysler PT Cruiser (141 HP @ 5200 RPM) has 21 more horse power than 1977 AMC Matador. (120 HP @ 3200 RPM) In normal driving conditions, 2010 Chrysler PT Cruiser should accelerate faster than 1977 AMC Matador. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler PT Cruiser weights approximately 12 kg more than 1977 AMC Matador. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 AMC Matador is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 AMC Matador. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 AMC Matador (298 Nm @ 2000 RPM) has 84 more torque (in Nm) than 2010 Chrysler PT Cruiser. (214 Nm @ 4000 RPM). This means 1977 AMC Matador will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler PT Cruiser. 1977 AMC Matador has automatic transmission and 2010 Chrysler PT Cruiser has manual transmission. 2010 Chrysler PT Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 AMC Matador will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 AMC Matador | 2010 Chrysler PT Cruiser | |
Make | AMC | Chrysler |
Model | Matador | PT Cruiser |
Year Released | 1977 | 2010 |
Engine Position | Front | Front |
Engine Size | 4982 cc | 2427 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 120 HP | 141 HP |
Engine RPM | 3200 RPM | 5200 RPM |
Torque | 298 Nm | 214 Nm |
Torque RPM | 2000 RPM | 4000 RPM |
Engine Bore Size | 95.3 mm | 87.5 mm |
Engine Stroke Size | 87.4 mm | 101 mm |
Engine Compression Ratio | 8.4:1 | 9.5:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1861 kg | 1873 kg |
Vehicle Length | 5330 mm | 4290 mm |
Vehicle Width | 1970 mm | 1900 mm |
Vehicle Height | 1320 mm | 1550 mm |
Wheelbase Size | 2900 mm | 2620 mm |
Fuel Tank Capacity | 92 L | 57 L |