1977 Audi 100 vs. 1980 Chrysler 1609

To start off, 1980 Chrysler 1609 is newer by 3 year(s). Which means there will be less support and parts availability for 1977 Audi 100. In addition, the cost of maintenance, including insurance, on 1977 Audi 100 would be higher. At 2,144 cc (5 cylinders), 1977 Audi 100 is equipped with a bigger engine. In terms of performance, 1977 Audi 100 (114 HP @ 5500 RPM) has 13 more horse power than 1980 Chrysler 1609. (101 HP @ 5800 RPM). In normal driving conditions, 1977 Audi 100 should accelerate faster than 1980 Chrysler 1609. With that said, vehicle weight also plays an important factor in acceleration. 1977 Audi 100 weights approximately 50 kg more than 1980 Chrysler 1609. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1980 Chrysler 1609 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Chrysler 1609. However, in wet, icy, snow, or gravel driving conditions, 1977 Audi 100, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Audi 100 (166 Nm @ 4000 RPM) has 22 more torque (in Nm) than 1980 Chrysler 1609. (144 Nm @ 3800 RPM). This means 1977 Audi 100 will have an easier job in driving up hills or pulling heavy equipment than 1980 Chrysler 1609. 1980 Chrysler 1609 has automatic transmission and 1977 Audi 100 has manual transmission. 1977 Audi 100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Chrysler 1609 will be easier to drive especially in heavy traffic.

Compare all specifications:

1977 Audi 100 1980 Chrysler 1609
Make Audi Chrysler
Model 100 1609
Year Released 1977 1980
Engine Position Front Front
Engine Size 2144 cc 1812 cc
Engine Cylinders 5 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 114 HP 101 HP
Engine RPM 5500 RPM 5800 RPM
Torque 166 Nm 144 Nm
Torque RPM 4000 RPM 3800 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1150 kg 1100 kg
Vehicle Length 4600 mm 4530 mm
Vehicle Width 1770 mm 1740 mm
Vehicle Height 1400 mm 1450 mm
Wheelbase Size 2680 mm 2670 mm