1977 Bristol 412 vs. 2010 Chrysler PT Cruiser
To start off, 2010 Chrysler PT Cruiser is newer by 33 year(s). Which means there will be less support and parts availability for 1977 Bristol 412. In addition, the cost of maintenance, including insurance, on 1977 Bristol 412 would be higher. At 5,898 cc (8 cylinders), 1977 Bristol 412 is equipped with a bigger engine. In terms of performance, 1977 Bristol 412 (171 HP @ 4000 RPM) has 57 more horse power than 2010 Chrysler PT Cruiser. (114 HP @ 6300 RPM). In normal driving conditions, 1977 Bristol 412 should accelerate faster than 2010 Chrysler PT Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 1977 Bristol 412 weights approximately 249 kg more than 2010 Chrysler PT Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Bristol 412 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Bristol 412. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler PT Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Bristol 412 (366 Nm @ 2000 RPM) has 209 more torque (in Nm) than 2010 Chrysler PT Cruiser. (157 Nm @ 4550 RPM). This means 1977 Bristol 412 will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler PT Cruiser. 1977 Bristol 412 has automatic transmission and 2010 Chrysler PT Cruiser has manual transmission. 2010 Chrysler PT Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 Bristol 412 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1977 Bristol 412 | 2010 Chrysler PT Cruiser | |
| Make | Bristol | Chrysler |
| Model | 412 | PT Cruiser |
| Year Released | 1977 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 5898 cc | 1596 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 171 HP | 114 HP |
| Engine RPM | 4000 RPM | 6300 RPM |
| Torque | 366 Nm | 157 Nm |
| Torque RPM | 2000 RPM | 4550 RPM |
| Engine Bore Size | 101.7 mm | 77 mm |
| Engine Stroke Size | 90.9 mm | 85.8 mm |
| Engine Compression Ratio | 8.0:1 | 11.0:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 5 seats |
| Vehicle Weight | 1690 kg | 1441 kg |
| Vehicle Length | 4950 mm | 4290 mm |
| Vehicle Width | 1780 mm | 1750 mm |
| Vehicle Height | 1450 mm | 1610 mm |
| Wheelbase Size | 2910 mm | 2620 mm |
