1977 Chevrolet Corvette vs. 1998 Lancia Kappa
To start off, 1998 Lancia Kappa is newer by 21 year(s). Which means there will be less support and parts availability for 1977 Chevrolet Corvette. In addition, the cost of maintenance, including insurance, on 1977 Chevrolet Corvette would be higher. At 5,733 cc (8 cylinders), 1977 Chevrolet Corvette is equipped with a bigger engine. In terms of performance, 1977 Chevrolet Corvette (210 HP @ 5200 RPM) has 8 more horse power than 1998 Lancia Kappa. (202 HP @ 5600 RPM). In normal driving conditions, 1977 Chevrolet Corvette should accelerate faster than 1998 Lancia Kappa. With that said, vehicle weight also plays an important factor in acceleration. 1977 Chevrolet Corvette weights approximately 127 kg more than 1998 Lancia Kappa. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Chevrolet Corvette is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Chevrolet Corvette. However, in wet, icy, snow, or gravel driving conditions, 1998 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Chevrolet Corvette (346 Nm @ 3600 RPM) has 48 more torque (in Nm) than 1998 Lancia Kappa. (298 Nm @ 2750 RPM). This means 1977 Chevrolet Corvette will have an easier job in driving up hills or pulling heavy equipment than 1998 Lancia Kappa. 1977 Chevrolet Corvette has automatic transmission and 1998 Lancia Kappa has manual transmission. 1998 Lancia Kappa will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 Chevrolet Corvette will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Chevrolet Corvette | 1998 Lancia Kappa | |
Make | Chevrolet | Lancia |
Model | Corvette | Kappa |
Year Released | 1977 | 1998 |
Body Type | Coupe | Station Wagon |
Engine Position | Front | Front |
Engine Size | 5733 cc | 1994 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 210 HP | 202 HP |
Engine RPM | 5200 RPM | 5600 RPM |
Torque | 346 Nm | 298 Nm |
Torque RPM | 3600 RPM | 2750 RPM |
Engine Bore Size | 101.6 mm | 84 mm |
Engine Stroke Size | 88.4 mm | 90 mm |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 2 seats | 5 seats |
Vehicle Weight | 1677 kg | 1550 kg |
Vehicle Length | 4710 mm | 4700 mm |
Vehicle Width | 1760 mm | 1840 mm |
Vehicle Height | 1230 mm | 1470 mm |
Wheelbase Size | 2500 mm | 2710 mm |