1977 Chrysler 1610 vs. 1998 Mazda Sentia

To start off, 1998 Mazda Sentia is newer by 21 year(s). Which means there will be less support and parts availability for 1977 Chrysler 1610. In addition, the cost of maintenance, including insurance, on 1977 Chrysler 1610 would be higher. At 2,954 cc (6 cylinders), 1998 Mazda Sentia is equipped with a bigger engine. In terms of performance, 1998 Mazda Sentia (159 HP @ 5500 RPM) has 49 more horse power than 1977 Chrysler 1610. (110 HP @ 5800 RPM) In normal driving conditions, 1998 Mazda Sentia should accelerate faster than 1977 Chrysler 1610. With that said, vehicle weight also plays an important factor in acceleration. 1998 Mazda Sentia weights approximately 435 kg more than 1977 Chrysler 1610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Mazda Sentia (245 Nm @ 2500 RPM) has 86 more torque (in Nm) than 1977 Chrysler 1610. (159 Nm @ 3400 RPM). This means 1998 Mazda Sentia will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler 1610. 1998 Mazda Sentia has automatic transmission and 1977 Chrysler 1610 has manual transmission. 1977 Chrysler 1610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1998 Mazda Sentia will be easier to drive especially in heavy traffic.

Compare all specifications:

1977 Chrysler 1610 1998 Mazda Sentia
Make Chrysler Mazda
Model 1610 Sentia
Year Released 1977 1998
Engine Position Front Front
Engine Size 1981 cc 2954 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 110 HP 159 HP
Engine RPM 5800 RPM 5500 RPM
Torque 159 Nm 245 Nm
Torque RPM 3400 RPM 2500 RPM
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1125 kg 1560 kg
Vehicle Length 4540 mm 4900 mm
Vehicle Width 1740 mm 1800 mm
Vehicle Height 1450 mm 1430 mm
Wheelbase Size 2680 mm 2860 mm