1977 Chrysler 1610 vs. 2009 Mazda CX-7

To start off, 2009 Mazda CX-7 is newer by 32 year(s). Which means there will be less support and parts availability for 1977 Chrysler 1610. In addition, the cost of maintenance, including insurance, on 1977 Chrysler 1610 would be higher. At 2,260 cc (4 cylinders), 2009 Mazda CX-7 is equipped with a bigger engine. In terms of performance, 2009 Mazda CX-7 (244 HP @ 5000 RPM) has 134 more horse power than 1977 Chrysler 1610. (110 HP @ 5800 RPM) In normal driving conditions, 2009 Mazda CX-7 should accelerate faster than 1977 Chrysler 1610. With that said, vehicle weight also plays an important factor in acceleration. 2009 Mazda CX-7 weights approximately 69 kg more than 1977 Chrysler 1610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1977 Chrysler 1610 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Chrysler 1610. However, in wet, icy, snow, or gravel driving conditions, 2009 Mazda CX-7, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Mazda CX-7 (350 Nm @ 2500 RPM) has 191 more torque (in Nm) than 1977 Chrysler 1610. (159 Nm @ 3400 RPM). This means 2009 Mazda CX-7 will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler 1610. 2009 Mazda CX-7 has automatic transmission and 1977 Chrysler 1610 has manual transmission. 1977 Chrysler 1610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Mazda CX-7 will be easier to drive especially in heavy traffic.

Compare all specifications:

1977 Chrysler 1610 2009 Mazda CX-7
Make Chrysler Mazda
Model 1610 CX-7
Year Released 1977 2009
Engine Position Front Front
Engine Size 1981 cc 2260 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 110 HP 244 HP
Engine RPM 5800 RPM 5000 RPM
Torque 159 Nm 350 Nm
Torque RPM 3400 RPM 2500 RPM
Engine Bore Size 91.7 mm 87.5 mm
Engine Stroke Size 75 mm 98 mm
Engine Compression Ratio 9.5:1 10.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1125 kg 1194 kg
Vehicle Length 4540 mm 4680 mm
Vehicle Width 1740 mm 1880 mm
Vehicle Height 1450 mm 1650 mm
Wheelbase Size 2680 mm 2760 mm
Fuel Tank Capacity 65 L 69 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]