1977 Chrysler 1610 vs. 2013 Mazda 3
To start off, 2013 Mazda 3 is newer by 36 year(s). Which means there will be less support and parts availability for 1977 Chrysler 1610. In addition, the cost of maintenance, including insurance, on 1977 Chrysler 1610 would be higher. At 2,489 cc (4 cylinders), 2013 Mazda 3 is equipped with a bigger engine. In terms of performance, 2013 Mazda 3 (165 HP @ 6000 RPM) has 55 more horse power than 1977 Chrysler 1610. (110 HP @ 5800 RPM) In normal driving conditions, 2013 Mazda 3 should accelerate faster than 1977 Chrysler 1610. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mazda 3 weights approximately 283 kg more than 1977 Chrysler 1610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1977 Chrysler 1610 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Chrysler 1610. However, in wet, icy, snow, or gravel driving conditions, 2013 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Mazda 3 (228 Nm @ 4000 RPM) has 69 more torque (in Nm) than 1977 Chrysler 1610. (159 Nm @ 3400 RPM). This means 2013 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler 1610. 2013 Mazda 3 has automatic transmission and 1977 Chrysler 1610 has manual transmission. 1977 Chrysler 1610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Mazda 3 will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Chrysler 1610 | 2013 Mazda 3 | |
Make | Chrysler | Mazda |
Model | 1610 | 3 |
Year Released | 1977 | 2013 |
Engine Position | Front | Front |
Engine Size | 1981 cc | 2489 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 110 HP | 165 HP |
Engine RPM | 5800 RPM | 6000 RPM |
Torque | 159 Nm | 228 Nm |
Torque RPM | 3400 RPM | 4000 RPM |
Engine Bore Size | 91.7 mm | 89 mm |
Engine Stroke Size | 75 mm | 100 mm |
Engine Compression Ratio | 9.5:1 | 9.7:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | 5-speed automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1125 kg | 1408 kg |
Vehicle Length | 4540 mm | 4595 mm |
Vehicle Width | 1740 mm | 1755 mm |
Vehicle Height | 1450 mm | 1470 mm |
Wheelbase Size | 2680 mm | 2640 mm |
Fuel Tank Capacity | 65 L | 55 L |