1977 Chrysler Avenger vs. 1960 Holden FC
To start off, 1977 Chrysler Avenger is newer by 17 year(s). Which means there will be less support and parts availability for 1960 Holden FC. In addition, the cost of maintenance, including insurance, on 1960 Holden FC would be higher. At 2,165 cc (6 cylinders), 1960 Holden FC is equipped with a bigger engine. In terms of performance, 1977 Chrysler Avenger (70 HP @ 5600 RPM) has 8 more horse power than 1960 Holden FC. (62 HP @ 4000 RPM). In normal driving conditions, 1977 Chrysler Avenger should accelerate faster than 1960 Holden FC. With that said, vehicle weight also plays an important factor in acceleration. 1960 Holden FC weights approximately 80 kg more than 1977 Chrysler Avenger.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1960 Holden FC (150 Nm @ 1400 RPM) has 54 more torque (in Nm) than 1977 Chrysler Avenger. (96 Nm @ 4800 RPM). This means 1960 Holden FC will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler Avenger.
Compare all specifications:
1977 Chrysler Avenger | 1960 Holden FC | |
Make | Chrysler | Holden |
Model | Avenger | FC |
Year Released | 1977 | 1960 |
Engine Position | Front | Front |
Engine Size | 1295 cc | 2165 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 70 HP | 62 HP |
Engine RPM | 5600 RPM | 4000 RPM |
Torque | 96 Nm | 150 Nm |
Torque RPM | 4800 RPM | 1400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 900 kg | 980 kg |
Vehicle Length | 4150 mm | 4480 mm |
Vehicle Width | 1620 mm | 1710 mm |
Vehicle Height | 1420 mm | 1560 mm |
Wheelbase Size | 2500 mm | 2670 mm |