1977 Chrysler Avenger vs. 2001 Audi S3

To start off, 2001 Audi S3 is newer by 24 year(s). Which means there will be less support and parts availability for 1977 Chrysler Avenger. In addition, the cost of maintenance, including insurance, on 1977 Chrysler Avenger would be higher. At 1,781 cc (4 cylinders), 2001 Audi S3 is equipped with a bigger engine. In terms of performance, 2001 Audi S3 (210 HP @ 5800 RPM) has 140 more horse power than 1977 Chrysler Avenger. (70 HP @ 5600 RPM) In normal driving conditions, 2001 Audi S3 should accelerate faster than 1977 Chrysler Avenger. With that said, vehicle weight also plays an important factor in acceleration. 2001 Audi S3 weights approximately 630 kg more than 1977 Chrysler Avenger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2001 Audi S3 is four wheel drive (4WD), it will have significant more traction and grip than 1977 Chrysler Avenger. In wet, icy, snow, or gravel driving conditions, 2001 Audi S3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2001 Audi S3 (270 Nm @ 2100 RPM) has 174 more torque (in Nm) than 1977 Chrysler Avenger. (96 Nm @ 4800 RPM). This means 2001 Audi S3 will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler Avenger.

Compare all specifications:

1977 Chrysler Avenger 2001 Audi S3
Make Chrysler Audi
Model Avenger S3
Year Released 1977 2001
Engine Position Front Front
Engine Size 1295 cc 1781 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 70 HP 210 HP
Engine RPM 5600 RPM 5800 RPM
Torque 96 Nm 270 Nm
Torque RPM 4800 RPM 2100 RPM
Drive Type Rear 4WD
Transmission Type Manual Manual
Vehicle Weight 900 kg 1530 kg
Vehicle Length 4150 mm 4160 mm
Vehicle Width 1620 mm 1760 mm
Vehicle Height 1420 mm 1430 mm
Wheelbase Size 2500 mm 2520 mm