1977 Chrysler Sedan vs. 1973 Nissan Skyline

To start off, 1977 Chrysler Sedan is newer by 4 year(s). Which means there will be less support and parts availability for 1973 Nissan Skyline. In addition, the cost of maintenance, including insurance, on 1973 Nissan Skyline would be higher. At 4,342 cc (6 cylinders), 1977 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1977 Chrysler Sedan (201 HP @ 4800 RPM) has 116 more horse power than 1973 Nissan Skyline. (85 HP @ 6000 RPM). In normal driving conditions, 1977 Chrysler Sedan should accelerate faster than 1973 Nissan Skyline. With that said, vehicle weight also plays an important factor in acceleration. 1977 Chrysler Sedan weights approximately 550 kg more than 1973 Nissan Skyline. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Chrysler Sedan (355 Nm @ 2000 RPM) has 217 more torque (in Nm) than 1973 Nissan Skyline. (138 Nm @ 4000 RPM). This means 1977 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1973 Nissan Skyline.

Compare all specifications:

1977 Chrysler Sedan 1973 Nissan Skyline
Make Chrysler Nissan
Model Sedan Skyline
Year Released 1977 1973
Engine Position Front Front
Engine Size 4342 cc 1593 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 201 HP 85 HP
Engine RPM 4800 RPM 6000 RPM
Torque 355 Nm 138 Nm
Torque RPM 2000 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1530 kg 980 kg
Vehicle Length 5000 mm 4260 mm
Vehicle Width 1890 mm 1630 mm
Vehicle Height 1420 mm 1410 mm
Wheelbase Size 2930 mm 2520 mm