1977 Chrysler Sedan vs. 1974 Ford Granada

To start off, 1977 Chrysler Sedan is newer by 3 year(s). Which means there will be less support and parts availability for 1974 Ford Granada. In addition, the cost of maintenance, including insurance, on 1974 Ford Granada would be higher. At 4,342 cc (6 cylinders), 1977 Chrysler Sedan is equipped with a bigger engine. In terms of performance, 1977 Chrysler Sedan (201 HP @ 4800 RPM) has 127 more horse power than 1974 Ford Granada. (74 HP @ 3200 RPM). In normal driving conditions, 1977 Chrysler Sedan should accelerate faster than 1974 Ford Granada. With that said, vehicle weight also plays an important factor in acceleration. 1977 Chrysler Sedan weights approximately 30 kg more than 1974 Ford Granada. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1977 Chrysler Sedan (355 Nm @ 2000 RPM) has 158 more torque (in Nm) than 1974 Ford Granada. (197 Nm @ 2000 RPM). This means 1977 Chrysler Sedan will have an easier job in driving up hills or pulling heavy equipment than 1974 Ford Granada.

Compare all specifications:

1977 Chrysler Sedan 1974 Ford Granada
Make Chrysler Ford
Model Sedan Granada
Year Released 1977 1974
Engine Position Front Front
Engine Size 4342 cc 3272 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 201 HP 74 HP
Engine RPM 4800 RPM 3200 RPM
Torque 355 Nm 197 Nm
Torque RPM 2000 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1530 kg 1500 kg
Vehicle Length 5000 mm 5030 mm
Vehicle Width 1890 mm 1890 mm
Vehicle Height 1420 mm 1360 mm
Wheelbase Size 2930 mm 2800 mm