1977 Chrysler Sedan vs. 1998 Vector M12
To start off, 1998 Vector M12 is newer by 21 year(s). Which means there will be less support and parts availability for 1977 Chrysler Sedan. In addition, the cost of maintenance, including insurance, on 1977 Chrysler Sedan would be higher. At 5,707 cc (12 cylinders), 1998 Vector M12 is equipped with a bigger engine. In terms of performance, 1998 Vector M12 (484 HP @ 6800 RPM) has 283 more horse power than 1977 Chrysler Sedan. (201 HP @ 4800 RPM) In normal driving conditions, 1998 Vector M12 should accelerate faster than 1977 Chrysler Sedan. With that said, vehicle weight also plays an important factor in acceleration. 1998 Vector M12 weights approximately 100 kg more than 1977 Chrysler Sedan. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Vector M12 (576 Nm @ 5200 RPM) has 221 more torque (in Nm) than 1977 Chrysler Sedan. (355 Nm @ 2000 RPM). This means 1998 Vector M12 will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler Sedan. 1977 Chrysler Sedan has automatic transmission and 1998 Vector M12 has manual transmission. 1998 Vector M12 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1977 Chrysler Sedan will be easier to drive especially in heavy traffic.
Compare all specifications:
1977 Chrysler Sedan | 1998 Vector M12 | |
Make | Chrysler | Vector |
Model | Sedan | M12 |
Year Released | 1977 | 1998 |
Body Type | Sedan | Coupe |
Engine Position | Front | Middle |
Engine Size | 4342 cc | 5707 cc |
Engine Cylinders | 6 cylinders | 12 cylinders |
Engine Type | in-line | V |
Horse Power | 201 HP | 484 HP |
Engine RPM | 4800 RPM | 6800 RPM |
Torque | 355 Nm | 576 Nm |
Torque RPM | 2000 RPM | 5200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Automatic | Manual |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1530 kg | 1630 kg |
Vehicle Length | 5000 mm | 4790 mm |
Vehicle Width | 1890 mm | 2030 mm |
Vehicle Height | 1420 mm | 1140 mm |
Wheelbase Size | 2930 mm | 2750 mm |